To ensure optimum performance, a window air conditioner, like other air conditioners such as split models, ducted air conditioners, and cassette-type units, must be cleaned regularly. After purchasing the best 1-ton window AC 5-star, you must make sure to look after it by cleaning it properly!
There are several methods for cleaning a window air conditioner regularly and a more comprehensive cleaning once a year, as we’ll see step by step. Whatever cleaning methods you choose, this gadget is all-important because it collects dirt from the environment while operating.
Because air conditioners filter hot air to cool it and discharge cold air, all of the dirt and dust particles in the environment gather. The risk is higher with a window air conditioner since a portion of the dirt from outside can enter the unit directly.
According to expert suggestions, we show you how to clean a window air conditioner in parts to extend the device’s useful life and optimize its operation.
Cleaning Your Window AC
Cleaning a window-type air conditioner typically removes some of the unit’s components where the most filth is collected. It is vital to cover or avoid contact with moisture on some parts to prevent them from being harmed while cleaning.
To avoid breaking the device, carefully disassemble it, removing the pieces without forcing them. Make sure you know where each piece goes to put it back together correctly when you’re done, eliminating any uncertainty that could compromise the air conditioner’s performance.
Let’s take a look at the significant components of a window air conditioner and how to clean them in each case:
Air conditioner parts that should not get wet include:
- Controls for the device, especially if it’s a digital air conditioner.
- Bearings, fan, and motor
- If it is not a sealed motor, the fan motor coil must be covered.
Cleaning Supplies and Equipment
To clean a window air conditioner, you’ll need some tools and cleaning supplies. Whether you’re doing a routine cleaning or entirely disassembling the device for a deep clean, keep the following items on hand at all times:
- Screwdrivers
- High-pressure washer or blower
- Cleaning brush
- Cleaning fluid
- Hydrogen peroxide
- Spray bottle
- Tray
- Towels
- Vacuum cleaner
Once you have all of the materials and cleaning products on hand, we’ll begin cleaning and sanitizing the window air conditioner one step at a time to make it seem brand new.
Also Read: Best VPN For Pubg
Clean the filter of any dirt.
The filter is the air conditioner component that collects the most filth. It’s simple to clean, and it’s usually in the front, making it easy to access for routine maintenance.
To reach the filter:
- Remove the front panel of the appliance.
- Always perform it with the gadget turned off and disconnected if possible. You’ll need to pull the tabs or unscrew the screws that hold the front together to get to the filter.
- Remove the filter with care to not get damaged, then clean it.
Rinse the filter with hot water while leaving the tap open. You can also use a pressure washer or a hose adapter to remove accumulated debris from the filter by spraying pressurized water. The dirt will not collect as much if you clean the filter once a month or two months.
You’ll need to wait for the filter to dry completely before reinstalling it. Shake off any excess water and dry with a towel, leaving it out in the open for as long as needed until no moisture remains.
Replace it, making sure the moist filter isn’t present. The filter wears out with time, and it can be replaced with a new one that performs just as well. Find a compatible filter with your air conditioner, and don’t be afraid to replace it when it’s time.
Window air conditioners should be cleaned regularly.
It is required to disassemble the device to clean it whenever necessary, such as when the air conditioner is not working correctly or when a lot of dirt has gathered. This cleaning should be done at the end of the season before shutting it off to use it again in the summer in air conditioners that are not used frequently.
Take apart the device.
Begin by disconnecting and turning off the equipment. Remove it from the window if feasible and position it in a broad area to work more efficiently.
To get to the inside of the device, remove the front panel and the fins that hold it to the window, and the screws from the frame. Make a safe spot for the screws, so they don’t get lost during the cleanup.
Cleaning the Coils
The coils, also known as fins, are thin aluminum sheets that run parallel throughout the device’s body. Use a soft bristle cleaning brush or a coarse paintbrush to clean them.
Because the edges of the coil can be sharp, handle it with care and avoid putting your fingers. It is sufficient to pass the brush on both sides, making vertical movements to remove all accumulated dust.
These are the most sensitive parts inside a window air conditioner and should never be exposed to water. It is recommended that you clean them with a blower, spraying compressed air over them to remove any ingrained debris.
Another approach is to use a fine brush to remove the dust by carefully brushing it through all cracks. Removed all dirt from the fan and motor without repositioning any parts, ensuring that the device’s operation was unaffected when restarted.
Cleaning the Appliance’s Body
It’s time to vacuum the loose dust that has been gathering within the gadget after we’ve cleaned the most delicate sections of the device, where most of the dirt generally collects. It’s ideal to use a vacuum cleaner for this, and it’s even better if you can control the power, so you don’t end up hurting the interior.
Pass the vacuum cleaner through the device’s inside sections, avoiding the peaceful places we’ve already cleaned. Wipe down all surfaces with a damp cloth and dry any remaining moisture when you’re done.
Reassemble each gadget element and replace it in its proper location, ensuring that it functions properly. The items will be as good as new, free of dust and debris that could obstruct their functionality.